Discussion area for integrated credit card processing for Manager products

X-Charge Equipment

X-Charge Equipment

Postby scarruther1 » Tue Sep 29, 2015 4:13 am

How do I get the new equipment needed for EMV? It's almost October and I haven't heard or seen anything from them?
scarruther1
25 Club: Starting Contributor
 
Posts: 40
Joined: Thu Apr 15, 2010 7:42 am

Re: X-Charge Equipment

Postby timbre4 » Tue Sep 29, 2015 5:43 am

I am told they've sent numerous emails, spam folder maybe? You can call customer service at 888-412-8816 to order the new equipment.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: X-Charge Equipment

Postby scarruther1 » Wed Sep 30, 2015 11:28 am

Thanks. Checked the spam - nothing. I tried calling for 2 days and cannot get through. The number just hangs up?
scarruther1
25 Club: Starting Contributor
 
Posts: 40
Joined: Thu Apr 15, 2010 7:42 am

Re: X-Charge Equipment

Postby scarruther1 » Thu Oct 01, 2015 12:18 pm

Got it! They're so busy :D FYI There's 2 models that work w/X Charge - Ingenico IPP320@ $249 or ISC250 w/signature capture @ $499.
scarruther1
25 Club: Starting Contributor
 
Posts: 40
Joined: Thu Apr 15, 2010 7:42 am

Re: X-Charge Equipment

Postby timbre4 » Thu Oct 01, 2015 12:21 pm

Thanks for posting an update. They've got to be buried right now.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: X-Charge Equipment

Postby Offerman22 » Thu Nov 12, 2015 4:04 am

I received my new equipment from X-Charge (ipp320 x 2) and when X-Charge Tech support tried to install on my computers, they informed me they are waiting on some kind of password from Mitchell 1 for EMV. X-Charge was unable to install the new equipment and I was told to wait until Mitchell 1 provides them that password. Does this make sense? Has anyone else had this problem? When will I be able to install the new equipment I purchased?
Offerman22
Member
 
Posts: 23
Joined: Wed Jul 21, 2010 4:26 am

Re: X-Charge Equipment

Postby timbre4 » Thu Nov 12, 2015 6:46 am

Checking into this - stay tuned
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: X-Charge Equipment

Postby timbre4 » Thu Nov 12, 2015 8:05 am

From HQ:

"The tech support person misspoke; he was referencing emv compliance but was unaware of the fact that all Mitchell 1 customers are emv compliant with the proper hardware. There is no need for a special password, the hardware should be plug in and go."
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: X-Charge Equipment

Postby Offerman22 » Thu Nov 12, 2015 11:01 am

Ok, thank you Tim! I will give it another try.
Offerman22
Member
 
Posts: 23
Joined: Wed Jul 21, 2010 4:26 am

Re: X-Charge Equipment

Postby Offerman22 » Wed Nov 18, 2015 5:20 am

I called X-Charge this morning to have my IPP-320 units installed and once again, their tech informed me that he could upgrade me to their 8.1 version and install my hardware BUT I will have to deal with entering a password for every card transaction, EMV or not.

I let this technician know that according to Mitchell 1, the new units should be plug and play. The tech's response at that point was basically, let's do the install and see what happens.

I opted to not perform the update/installation and go to the forum for a definitive answer.

If I perform this X-Charge 8.1 update and install my IPP-320 units onto my Windows 10 Mitchell 1 v6.6.10 computers, will I need to enter a password for each card transaction?
Offerman22
Member
 
Posts: 23
Joined: Wed Jul 21, 2010 4:26 am

Re: X-Charge Equipment

Postby timbre4 » Wed Nov 18, 2015 6:54 am

Checking on this - will advise
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: X-Charge Equipment

Postby timbre4 » Wed Nov 18, 2015 7:24 am

Here is the situation...

If you install that equipment NOW, you would be required to enter a password for each transaction. The current software for the new equipment was going to require a new password every 90 days to be in compliance. The issue was that it would NOT PROMPT USERS when this time came; this would translate into hundreds of additional calls to Mitchell 1 product tech support and product management opted not to take that route.

We are waiting for an API to be written that DOES PROMPT USERS for the 90 day password change required to be compliant. I was not given a timeframe for this but it is a serious matter getting full attention on our side. Their tech support is not aware of the full dynamics of the situation going on above their heads and will say that it is up to Mitchell 1 and that simply is not the case.

You are in compliance by having the hardware on site; I'm told the liability protection is in force even though you are not using it at this time.

Please know that I will post something here just as soon as the situation changes.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: X-Charge Equipment

Postby Offerman22 » Wed Nov 18, 2015 11:22 am

Ok, thank you Tim for the detailed explanation. We will be standing by.
Offerman22
Member
 
Posts: 23
Joined: Wed Jul 21, 2010 4:26 am

Re: X-Charge Equipment

Postby scarruther1 » Tue Jan 19, 2016 8:09 am

just following up on the thread. Are there still password issues with installing new chip reader? Thanks
scarruther1
25 Club: Starting Contributor
 
Posts: 40
Joined: Thu Apr 15, 2010 7:42 am

Re: X-Charge Equipment

Postby timbre4 » Tue Jan 19, 2016 8:48 am

The Manager SE 7.0.2 release had added the required fields for users to update passwords every 90 days to be in compliance:
xcpw.png
 
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4537
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Return to Credit Card Processing

Who is online

Users browsing this forum: No registered users and 1 guest