Questions about VIN, models, engines covered in the repair products

2008 Nissan Rogue - Blower Motor

2008 Nissan Rogue - Blower Motor

Postby brianp87 » Thu Aug 05, 2010 12:39 pm

2008 nissan rogue
Mitchell says to replace blower motor at 1.5 hrs? The repair guide says to remove evap case first which pays 5.6? Im confused it looks as though the repair is correct but estimator is not. I was looking at blower time to have tech remove for innspection and it says 1.5. Any ideas on were I screwed up
User avatar
brianp87
2.5K Uber Ninja Contributor
2.5K Uber Ninja Contributor
 
Posts: 2983
Joined: Tue Oct 10, 2006 6:11 am
Location: Arizona

Re: 2008 Nissan Rogue - Blower Motor

Postby crmeyers » Thu Aug 05, 2010 12:53 pm

Alldata says the same thing. It's BS. R&R evaporator case is 5.4, and it has to come out to replace the blower motor. Looks like Nissan provided Alldata & Mitchell bogus info. Hate when that happens!
Chris Meyers
Service Center Manager
Ocean Air Auto Repair
www.oceanairauto.com
User avatar
crmeyers
400 Club: Mega-Star Contributor
400 Club: Mega-Star Contributor
 
Posts: 423
Joined: Mon Mar 29, 2010 3:59 am
Location: Virginia Beach, VA

Re: 2008 Nissan Rogue - Blower Motor

Postby brianp87 » Thu Aug 05, 2010 12:55 pm

hmm sucks; Motor shows the same
User avatar
brianp87
2.5K Uber Ninja Contributor
2.5K Uber Ninja Contributor
 
Posts: 2983
Joined: Tue Oct 10, 2006 6:11 am
Location: Arizona

Re: 2008 Nissan Rogue - Blower Motor

Postby timbre4 » Thu Aug 05, 2010 1:55 pm

Too new for field reports to the contrary until today.

Please share with Product Support (link in Repair forum) and ours will get corrected first! :idea:
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
User avatar
timbre4
System Guru / Moderator
System Guru / Moderator
 
Posts: 4510
Joined: Tue May 25, 2004 5:47 pm
Location: TN - Volunteer State

Re: 2008 Nissan Rogue - Blower Motor

Postby steven kiser » Fri Aug 06, 2010 2:20 am

i always look at what it takes to r&r, mostly because i'm old school. i remember seeing many, many, labor times that didn't include accessibility. a good one was a blower motor in a full sized chevrolet. it paid .3. the inner fender had to be removed to get to it and the first generation of these were steel. whenever i get something that i've never run across before i always look at the r&r description before i quote.
never argue with a fool, they'll drag you down to their level and beat you with experience
User avatar
steven kiser
5K Holy Smokes Contributor
5K Holy Smokes Contributor
 
Posts: 6297
Joined: Fri Jul 06, 2007 4:58 am
Location: eastern ma.

Return to Model Coverage

Who is online

Users browsing this forum: No registered users and 1 guest