What Needs To be Fixed In ProDemand

[timbre4]

Okay, so to get to those items, you'd have to go through this:

diffs2.png (41.67 KiB) Viewed 66972 times

[brianp87]

2004 Dodge 3500

Here is another it does not say if this is front or rear ring and pinion.

[timbre4]

Same; sub-category [boxed in red] confirms Front or Rear for the items that follow once you select:

diffs3.png (44.2 KiB) Viewed 66972 times

[brianp87]

Mine does not do that. It goes like this on my end. For the 2011 F350.

[brianp87]

Here is the 2004 Dodge

[timbre4]

Okay, had to go back to another PC with SE 7.2.9 to see what you're seeing. So when you get SE 7.3.x in a few weeks it has the views I've shown above.

[sbcauto]

I Have Found Since My Last Post That On demand Is A Lot Better. Still Would Like to Print A Larger Wiring Diagram. Thanks

[himels]

When attempting to print a wiring diagram, I select the full page and it shows the print preview image on the screen as a Black & White image with a check mark that has to be removed each time if I would like to print in color. I would like to set the default to Color and avoid having to un-check each diagram for color printing.

[timbre4]

I would like to set the default to Color and avoid having to un-check each diagram for color printing.

Thanks for posting; inquiry made.

[timbre4]

Here is the response regarding printing question:

"We created the current experience because people complained about the cost of color ink cartridges."

[sbebenelli]

Here is the response regarding printing question:

"We created the current experience because people complained about the cost of color ink cartridges."

Who would want to print a color wiring diagram in black & white lol

[timbre4]

Here is the response regarding printing question:

"We created the current experience because people complained about the cost of color ink cartridges."

Who would want to print a color wiring diagram in black & white lol

I know, but you'd be amazed how many calls we got.

[ricmorin]

Maybe make it a sticky setting so that users can choose one and never have to change it? I too find it annoying that I have to uncheck that box EVERY time.

[timbre4]

Maybe make it a sticky setting so that users can choose one and never have to change it? I too find it annoying that I have to uncheck that box EVERY time.

If it was a desktop app, it would be pretty simple. I believe the printing attribute in a browser is problematic or we'd have that option. I did hear that it *might* be possible to discern what type of document and print appropriately. (thinking B/W for repair info + color for diagrams as example)

[ricmorin]

I had a feeling. If it's a one page diagram I pull it up on the 32 inch screen.

diagnostic cart

20200219_140002little.jpg (44.85 KiB) Viewed 65387 times

Multi page diagrams are a different story.

[sbebenelli]

I'm the same way. I have a 32" at my tool box. I would rather look at a wiring diagram on that than a small piece of paper.

[himels]

When browsing for TSBs through the Service Manual menu, if I click on a particular bulletin, read it and then click on the back arrow, I'm taken back to the exact category where I had just been (preferred). When I use the 1Search Plus menu to click on TSB quick link and I choose a lower category that I had to scroll down to find and I finish reading a bulletin, I'm taken all the way back to the top. I then have to scroll back down to the category where I left off to finish reading through the remaining bulletins. Is there a way to update this to take me back to the same category where I just left off? Some vehicles have multiple bulletins in the lower categories that I need to check and it ends up being a lot of wasted movements to accomplish this.

Also, when clicking on the Recalls/Campaigns tab in the upper right hand corner, after clicking on and reading a single entry I can't find a way to go back to the previously opened drop down menu of titles. The only option I see is to close the entire tab and then click on it again to see other entries. Is that the way the Recall/Campaigns tab was intended to work?

[timbre4]

Thanks for the input, I will forward this to the appropriate department.

[ricmorin]

When browsing for TSBs through the Service Manual menu, if I click on a particular bulletin, read it and then click on the back arrow, I'm taken back to the exact category where I had just been (preferred). When I use the 1Search Plus menu to click on TSB quick link and I choose a lower category that I had to scroll down to find and I finish reading a bulletin, I'm taken all the way back to the top. I then have to scroll back down to the category where I left off to finish reading through the remaining bulletins. Is there a way to update this to take me back to the same category where I just left off? Some vehicles have multiple bulletins in the lower categories that I need to check and it ends up being a lot of wasted movements to accomplish this.

Also, when clicking on the Recalls/Campaigns tab in the upper right hand corner, after clicking on and reading a single entry I can't find a way to go back to the previously opened drop down menu of titles. The only option I see is to close the entire tab and then click on it again to see other entries. Is that the way the Recall/Campaigns tab was intended to work?

Using the back button doesn't work well with ProDemand. To navigate back to another section, you can click on either of these to links circled.

recallnavigation.png (90.98 KiB) Viewed 11516 times

[himels]

Ric, I'm aware that using the back button doesn't work well and I typically avoid it. The issue I described related to Recalls is specifically related to Recalls/Campaigns button on the upper right of the screen, next to the training tab. When I pick a recall or campaign, read it and wish to check the remaining choices, I haven't found anything to click to return to the list. Even if I click on the arrow at the top left, inside the ProDemand screen that should return me to the previous screen, it simply closes out the Recalls/Campaigns screen the same as if I had clicked on the X at the upper right of the screen, next to the Print tab.

Screenshot 2025-10-08 172134.png (148.57 KiB) Viewed 11482 times

The issue related to the TSB's is that if I'm in the Mechanical subject area and click on a specific TSB, once I finish reading that specific TSB and attempt to look at another Mechanical TSB or anything in a category below it, I'm brought all the way back to the top of the list and I have to scroll back down to where I left off. In this example there are 38 Mechanical TSB's alone, plus many more categories below it. I've been dealing with it ever since ProDemand was introduced, but thought I would ask if there was a better way.

Screenshot 2025-10-08 173632.png (156.74 KiB) Viewed 11482 times